4
ABOUT THE SETTING SCREEN
4-23
7. [RoIP Server Settings] Menu
[RoIP Server Settings]–[Telephone Gateway Interconnection]
■
Telephone Gateway Interconnection
Set the Telephone Gateway Interconnection with a VE-PG3.
1
No. �����������
Select the number that is registered to a device.
L
Up to 20 devices can be registered.
2
Destination Address ���
Enter the destination device’s IP address or domain name. (Up to 63
characters)
3
Destination Port Number �
Enter the destination VE-PG3’s port number.
Range: ‘2’ to ‘65534’ (only even numbers)
L
The set port number (RTP) and the port 1 (RTCP) are used for the
communication.
4
Source Port Number ���
Enter the port number for receiving audio signals.
Range: ‘2’ to ‘65534’ (only even numbers)
Information
L
•The set port number (RTP) and the port 1 (RTCP) are used for the
communication.
•This number is also used for the caller port number.
•Do not set the port number which has already been used by another
connection setting.
5
<Apply> ��������
Click to apply the entries.
6
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.
(This is only an example.)
5
6
1
2
3
4