4
ABOUT THE SETTING SCREEN
4-11
4. [Network Settings] Menu
[Network Settings]–[IP Address]
■
IP Address
Enter the IP1000C’s IP Address.
1
IP Address �������
Enter the LAN IP address according to your network environment.
(Default: 192.168.0.1)
L
When using the DHCP Server function, the network part of the IP address
must be the same as that set in the “IP Pool Start Address” item in the
[DHCP Server] menu. (p. 4-12)
2
Subnet Mask ������
Enter the subnet mask according to your network environment.
(Default: 255.255.255.0)
3
Default Gateway �����
If a default gateway device (such as a router) is connected to the LAN
port, enter the device’s IP address.
4
Primary DNS server ���
Enter the DNS server address specified by your service provider.
If you have two DNS server addresses, enter the primary address.
5
Secondary DNS server ��
Enter the secondary DNS server address, if you have two DNS server
addresses.
6
<Apply> ��������
Click to apply the entries.
7
<Reset> ��������
Click restore the settings.
L
You cannot restore after clicking <Apply>.
1
2
3
4
5
6
7