4
ABOUT THE SETTING SCREEN
4-159
11. [Management] Menu
[Management]–[SNMP]
■
SNMP
Configure the SNMP function.
1
2
3
4
5
6
1
SNMP����������
Select “Enable” to use the SNMP function. (Default: Enable)
2
Community Name (GET) �
Enter the Community name to get the SNMP community string. (Up to
31 characters)
(Default: public)
3
System Location ����
Enter the SNMP system location. (Up to 127 characters)
4
System Contact �����
Enter the SNMP system contact. (Up to 127 characters)
5
<Apply> ��������
Click to apply the entries.
6
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.