1
BEFORE USING THE IP1000C
1-12
To use Area Call, it is required to enable the [Area Call] for each WLAN transceiver in the [Transceiver
Settings] screen, and then register the area’s wireless access point (BSSID) in the [Area Entry List].
All Call
IP100H makes an All Call with the Area Call function
IP100FS calls the All Call with the Area Call function
The wireless access points that the
IP100H is included in with the Area Call
function, are set on the [Area Call] screen
in the [RoIP Server Settings] menu.
(Example: For Sales and For Accounts)
When the IP100FS uses the Area Call
function, can call IP100Hs that are in the
communication range of the access points
assigned to the Area Call.
Select the access point in the [Location], the
Call type (Individual, Group, All, Area or
Telephone) and names are displayed
IP1000C
IP100H
Wireless
access point
Sales
Accounts
Parts
2. Feature description
■
Area Call
This function is used when operating by limiting to a certain area.
(Default: Disable)
If you make an All Call or Group Call when Area Call in the WLAN transceiver is set to ON, the WLAN
transceiver and IP100FS that are in the same area with the WLAN transceiver connected to the wireless
access point are called.