![background image](http://html1.mh-extra.com/html/icom/im423/im423_instruction-manual_4301608014.webp)
5
2
PANEL DESCRIPTION
New2001
Function display
■
q
BUSY/TRANSMIT ICON
(p. 11)
“
➥
” appears when receiving a signal or when the
squelch is open.
“
➥
” appears while transmitting.
w
POWER ICON
(p. 11)
“25W” appears when high power is selected.
➥
“1W” appears when low power is selected.
➥
e
RX SPEAKER ICON
(p. 73)
Appears while in the RX Speaker mode.
r
CHANNEL GROUP ICON
(p. 10)
A selected channel group icon, U.S.A. “USA,” Interna-
➥
tional “INT” or Canadian “CAN” appears, depending on
the transceiver version.
“WX” appears when the weather channel is selected.*
➥
*Only U.S.A. and Australian version transceivers.
t
CALL CHANNEL ICON
(p. 9)
Appears when the Call channel is selected.
y
DUPLEX ICON
(p. 10)
Appears when a duplex channel is selected.
u
TAG CHANNEL ICON
(p. 18)
Appears when a TAG (favorite) channel is selected.
i
MAIL ICON
(p. 63)
Blinks when there is an unread message.
o
GPS ICON
Stays ON when the GPS receiver is activated and valid
➥
position data is received.
Blinks when invalid position data is being received.
➥
!0
SWITCH ICON
(p. 67)
Appears when the “CH 16 SWITCH” in DSC Settings is set
to ‘OFF.’
!1
LOW BATTERY ICON
Blinks when the battery voltage drops to approximately
10 V DC or less.
!2
CHANNEL NUMBER READOUT
Shows the selected operating channel number.
• When a simplex channel is selected, “A” appears.
!3
CHANNEL NAME FIELD
The channel name appears, if programmed. (p. 13)
!8
!4
!6
!7
!5
q
w
i
e
t
r
!0
y
o
u
!1
!2
!3
Summary of Contents for iM423
Page 98: ...89 10 CONNECTIONS AND MAINTENANCE Gasket Mounting base Cap Nut...
Page 104: ......
Page 105: ...MEMO...
Page 106: ...MEMO...