6
SCAN OPERATION
6-6
Setting or clearing a Scan tag
You can set or clear a Scan tag to or from a channel in
a Scan list.
The Scan tag channel is a target channel during a
Scan.
<Key operation>
1. Select a channel. (p. 3-5)
2. Push [Scan Add/Del (Tag)] to display the current
Scan list.
3. Push [CH Up] or [CH Down] to select a Scan list.
4. Push [Scan Add/Del (Tag)] again to set or clear a
Scan tag to or from the selected Scan list.
• When a channel is added to the Scan list, the display
shows "SCAN ON."
• When a channel is deleted from the Scan list, the
display shows "SCAN OFF."
When setting a Scan tag:
Portable
SCAN1
MENU SCAN SCAD LONE
SCAD
SCAN ON
MENU SCAN SCAD LONE
SCAD
L
The key icon “SCAD” is highlighted.
Mobile
S C A N
O N
S C A N 1
L
The activated key icon is displayed above the [Scan
Add/Del(Tag)] key.
When clearing a Scan tag:
Portable
SCAN1
MENU SCAN SCAD LONE
SCAN OFF
MENU SCAN SCAD LONE
L
The key icon “SCAD” highlight disappears.
Mobile
S C A N
O F F
S C A N 1
L
The activated key icon above the [Scan Add/Del(Tag)]
key disappears.
5. Hold down [Scan Add/Del (Tag)] for 1 second to
return to the Standby mode.
Previous view
