8
INSTALLATION AND CONNECTION
3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1
2
■
Connecting multiple repeaters
Connect multiple repeaters using the supplied LAN
cable. This allows sharing one gateway server by
multiple repeaters for different bands.
L
Up to 4 repeaters are connectable.
L
Only one DD mode ID-RP1200VD can be connected.
L
Confirm that the ID of each connected repeater is not
duplicated. The repeater ID is changeable using the Utility
for ID-RP3 (Tool >
Rewrite ID
).
L
If you use a LAN cable other than the one supplied, use
one with a length of 3 meter or less.
L
You cannot use with the ID-RP2C when the [CONT I/O
RPT] is set to [RPT].
Connection example:
ID-RP2010V
ID-RP4010V
LAN cable
[RPT1]
[RPT2]
[CONT I/O]
[RPT]
[CONT I/O]
[RPT]
LAN cable
[RPT1]
[RPT2]
LAN cable
[RPT1]
[RPT2]
ID-RP1200VD (DD mode)
ID-RP1200VD (DV mode)
[DD]
[DV]
[DD]
[DV]
■
Connecting to the ID-RP2C
Connect the ID-RP2C Repeater controller and assist
repeater as a gateway for the repeater.
L
If you use a LAN cable other than the one supplied, use
one with a length of 3 meter or less.
L
A Gateway server is usable with connecting the ID-RP2C.
L
You cannot connect multiple repeaters when the
[CONT I/O RPT] is set to [CONT I/O].
L
The ID-RP1200VD in DD mode is not usable.
[CONT I/O]
[RPT]
LAN cable
ID-RP2C
[CONT I/O]
[CONT I/O 1]
[CONT I/O 2]
LAN cable
ID-RP2010V or ID-RP4010V
[CONT I/O]
ID-RP1200VD
(DV mode)
[CONT I/O]
[RPT]
[DD]
[DV]
Connection example:
NOTE:
The repeaterʼs default ID is as follows:
ID-RP2010V: 1, ID-RP4010V: 2, ID-RP1200VD: 3
If two ID-RP1200VD repeaters, one for DV mode and
the other for DD mode are connected, they must not
have the same ID. Change the DD repeaterʼs ID to 4.
Summary of Contents for ID-RP1200VD
Page 23: ...MEMO ...
