GPS OPERATION
7
30
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
BASIC MANUAL
■
GPS Logger function
The GPS Logger function enables you to save the location data from a GPS receiver onto
a microSD card as a log. The GPS Logger saves Latitude, Longitude, Altitude, Positioning
state, Course, Speed, Date, and Time.
If you use this GPS Logger while traveling, you can check your trip history on mapping
software.
About the log file
If you have the log file imported to mapping software, you can display your route as you
move on to the software map.
L
The log files may not be compatible with all mapping software.
L
See the Advanced manual for details on copying the log files onto your PC.
NOTE:
•The GPS Logger function requires a microSD card (User supplied). See page 7 for
details.
•This function is turned ON as the default setting. Therefore when you insert a microSD card,
this function continuously saves the location data from the GPS receiver, even if you turn
OFF the transceiver, then ON again.
To turn OFF the function, do the steps below.
•When the microSD card is full, this function will automatically be paused.
D
Turning OFF the GPS Logger function
You can turn OFF the GPS Logger function by following the steps below.
[MENU] > GPS > GPS Logger >
GPS Logger
1. Push [MENU].
2. Select “GPS Logger” in the “GPS” menu.
3. Select “GPS Logger.”
4. Select “OFF.”
L
To exit the MENU screen, push [MENU].
