11
REPEATER AND DUPLEX OPERATIONS
11-3
FM Repeater operation
D
Checking the Repeater input signal
You can check whether or not that another station’s
transmit signal can be received directly (not through a
repeater), by listening to the repeater input frequency
Hold down [SQL] to listen on the repeater input
frequency
D
1750 Hz tone burst
A 1750 Hz tone is required to access many European
repeaters
For the ID-52E only
Push [PTT] briefly and release, and then hold down
[PTT] to transmit a 1750 Hz tone burst signal
1 Push [MENU]
2 Select “DTMF/T-CALL” in the “SET” menu
3 Select “DTMF Memory”
4 Select “T-CALL”
5 Push [MENU] to exit the MENU screen
6 Rotate [DIAL] to set the frequency received from a
repeater
7 Set the offset frequency and the duplex direction
(p 11-4)
• The duplex icon is displayed
8 While holding down [PTT] to transmit, push [SQL]
to transmit a 1750 Hz tone signal
• Accesses the repeater with a short tone burst
9 Operate in a normal way
L
In the same way as a simplex call, alternately
transmit and receive
L
Information
• While monitoring, the status indicator lights green, and an
S/RF meter dot blinks
• While monitoring, the displayed frequency automatically
changes to the transceiver transmit frequency (repeater
input frequency)
• When the other station’s signal can be directly received,
move to a non-repeater frequency, and use simplex
(Duplex OFF)
Display while monitoring
