8
D-STAR OPERATION <BASIC>
8-10
■
Setting “TO” (Destination) (Continued)
D
Using
“
Gateway CQ
”
(Gateway call)
The destination repeater is set in “TO” to call a station
through your local area (access) repeater, gateway
repeater, the internet and then to your destination re-
peater.
q
Hold down
for 1 second.
• The DR screen appears.
w
Push D-pad(
) to select “TO” (Destination), and then
push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select “Gateway CQ,” and then
push D-pad(Ent).
• The REPEATER GROUP screen is displayed.
r
Push D-pad(
) to select the repeater group where
your destination repeater is listed, and then push D-
pad(Ent).
• Example: “11: Japan”
t
Push D-pad(
) to select the destination repeater,
and then push D-pad(Ent).
• Example: “Hamacho”
• “Hamacho” is displayed in “TO.”
Example:
Making a gateway CQ call to (Japan; Hama-
cho) from the “Hirano” repeater.
Completed
TIP:
After selecting a repeater, you can select other
repeaters in your transceiver by rotating [DIAL].
Means this repeater
is the 282nd of the
690 repeaters on the
Repeater List.
NOTE:
When you set the repeater that has no gate-
way call sign in “FROM,” “
” appears.
In this case, you cannot make a gateway call.
Previous view
