manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 334

16

MENU SCREEN

16-79

 

■

Function items (Continued)

Heterodyne 

(Default: Normal)

Function > Heterodyne 

Set the 1st Local Oscillator frequency.
Depending on a combination of the two operating frequencies in the VHF/
UHF Dualwatch mode, the transceiver might generate a spurious signal on 
a specific receive frequency. This may cause the S-meter to fluctuate, even 
when no signal is received, for example.

TIP:

 If this occurs, the Heterodyne function may help. The Heterodyne func-

tion shifts the 1st Local Oscillator frequency to the opposite side of the 
signal to change the frequency combination.

Charging (Power ON) 

(Default: OFF)

Function > Charging (Power ON) 

When the battery pack is attached, and the optional CP-12L, CP-19R or 
OPC-254L external DC power cable is connected, this function enables 
charging the transceiver's battery even if the power is ON.

• OFF:   The transceiver's battery cannot be charged when the power is ON.
• ON:   The transceiver's battery can be charged even if the power is ON.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands