Icom ID-51A Advanced Manual Download Page 23

Page: 23 / 413

PANEL DESCRIPTION

3-2

ANTENNA CONNECTOR

(p. 1-2)

Connect the antenna here.

• An optional AD-92SMA adapter (p. 18-3) is available to

connect an antenna with a BNC connector.

TX/RX INDICATOR [TX/RX]

(pp. 5-7, 5-11)

Lights red while transmitting, lights green while re-

ceiving a signal or when the squelch is open.

PTT SWITCH [PTT]

(p. 5-11)

Hold down to transmit, release to receive.

For ID-51E only

Push briefly and release, then hold down to transmit

a 1750 Hz tone burst.

CD (RX CALLSIGN DISPLAY)/D-PAD (LEFT) KEY

[CD]/D-pad(



)

➥

While in the DV mode, hold down for
1 second to open the received calls record.
(p. 9-5)

➥

While in the DR screen, or with the Menu

screen or Quick Menu screen is displayed,
push to select an upper tier menu. (p. 16-2)

SQUELCH KEY [SQL]

➥

Hold down to temporarily open the squelch and
monitor the operating frequency.

➥

While holding down this key, rotate

[DIAL]

to ad-

just the squelch level. (p. 5-8)

POWER KEY [ ]

Hold down for 1 second to turn the transceiver power

ON or OFF. (p. 5-2)

MENU • LOCK KEY [MENU

]

➥

Push to enter or exit the Menu screen.

(p. 16-2)

➥

Hold down for 1 second to toggle the Key

Lock function ON or OFF. (p. 5-12)

MODE • SCAN KEY [MODE•SCAN]

➥

Push to select the operating mode.

(p. 5-9)

•

Selectable operating modes are AM, FM,
FM-N or DV.

➥

Hold down for 1 second to enter the scan

type selection mode. (pp. 13-5, 13-9)

• Push again to start the scan.
• Push

to stop the scan.

MAIN • DUAL KEY [MAIN•DUAL]

➥

Push to toggle the main band between A

and B bands. (p. 5-3)

➥

Push and hold for 1 second to toggle the

Dualwatch function ON or OFF. (p. 5-3)

microSD CARD SLOT [micro SD]

Insert a microSD card of up to 32 GB SDHC.

ENTER KEY [ENT]

When the DR set screen, Menu screen or Quick

Menu screen is displayed, push to set the selected
item or option. (p. 16-2)

■

Front, top and side panels

Speaker

Function
display (p. 3-5)

Internal
microphone

q
w

r
t

o
!0
!1

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands