13
SCAN OPERATION
13-2
■
Scan
Scanning is a versatile function that can automatically
search for signals and makes it easier to locate stations
to contact or listen to, or to skip unwanted channels or
frequencies.
D
VFO scan
•
ALL
Repeatedly scans the entire band.
108 MHz
479 MHz
Scan
Jump
P SKIP
P SKIP
•
BAND
Scans all frequencies over the entire selected band.
Band edge
Band edge
Scan
Jump
P SKIP
P SKIP
•
PROG 0~24
(Program scan) p. 13-5
Scans the frequency range which is programmed
into the program scan channels (PROGRAM-CH).
Band
edge XXA
XXB
Band
edge
Scan edges
Scan
Jump
Jump
•
P-LINK0~9
(Program link scan) p. 13-5
Sequentially scans the program scan channels
which are set to link in the “PROGRAM LINK” item
in the MENU screen. (p. 16-20)
(MENU > Scan >
Program Link
)
D
Memory scan
•
ALL
(Memory full scan) p. 13-9
Scans all memory channels.
•
BAND
(Selected band memory scan) p. 13-9
Scans all Memory channels on the same frequency
band as the selected channel.
•
MODE
(Mode memory scan) p. 13-9
Scans memory channels which are programmed
with the same receiving mode as the currently se-
lected mode.
D
Memory bank scan
•
ALL
Scans all banks.
•
BANK-LINK
Sequentially scans the banks which are set to link in
the “BANK LINK” item in the MENU screen.
(MENU > Scan >
Bank Link
)
•
BANK-A~Z
Scans the memory channels in the selected bank.
[Duplex (DUP) scan]
The Duplex scan searches for both TX and RX fre-
quencies which are used in duplex operation.
(p. 15-4, 15-5)
• The “DUP–” or “DUP+” icon is displayed in the duplex
mode.
• A duplex scan will not start when the frequency offset is
set to “0.000 MHz.”
[Tone scan]
The tone scan searches for tone frequencies or
DTCS codes that are used by stations using the Tone
Squelch function.
• A tone scan can be made in any mode: VFO, mem-
ory or Call channel.
• During a tone scan, rotate [DIAL] to switch scan
direction.
Refer to
“Tone Squelch function”
or
“DTCS code
Squelch function”
for details. (pp. 17-13 to 17-16)
NOTE:
Two or more memory channels must be pro-
grammed to start a memory scan.
• In the memory mode
Repeatedly scans all programmed Memory channels.
The frequencies that are set as skip channels “PSKIP”
and “SKIP” are not scanned. (p.13-12)
NOTE:
One or more pair of the scan edge channels
must be programmed to start a program scan.
D
About the scan function
• In the VFO mode
The frequencies that are set as “PSKIP” are skipped
during a scan. (p. 13-7)
Previous view
