Icom ID-51A Page 200 Advanced Manual Download

Page: 200 / 413

VOICE MEMORY FUNCTION

11-19

■

Voice Recorder function (Continued)

MIC Gain setting

Push [MENU]

to enter the Menu screen.

Push D-pad(



) to select the root item (Voice Memo),

and then push D-pad(Ent) to go to the next level.

D-pad

(

)

(Ent)

( MENU > Voice Memo > Voice Recorder > Recorder

Set >

MIC Gain

)

Refer to the menu sequence shown directly above
and push D-pad(



) to select, and then D-pad(Ent)

to enter, one or more times until the last screen is
displayed.

Push D-pad(



) to select the folder including the file

that you want to erase, then push D-pad(Ent).

• The MIC Gain screen is displayed.

Push D-pad(



) to set the internal microphone sensi-

tivity to between 1 (minimum sensitivity) and 4 (max-
imum sensitivity), to suit your needs.

• Higher values make the microphone more sensitive to

your voice.

Push [MENU]

to exit the Menu screen.

The selected gain
level is displayed
here.

MIC Gain setting in the VOICE RECORDER screen

While in the VOICE RE-
CORDER screen as shown
to the right, push [QUICK]

. And then push D-

pad(Ent) to set the internal
microphone gain.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands