11
VOICE MEMORY FUNCTION
11-11
In the default settings, the transceiver records audio
only while receiving signals (the squelch opens).
If you want to continue recording even if no signal is
received, do the following steps.
q
Push [MENU]
to enter the Menu screen.
w
Push D-pad(
) to select the root item (Voice Memo),
and then push D-pad(Ent) to go to the next level.
D-pad
(
)
(Ent)
( MENU > Voice Memo > QSO Recorder > Recorder
Set >
RX REC Condition
)
e
Refer to the menu sequence shown directly above
and push D-pad(
) to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
r
Push D-pad(
) to select “Always,” and then push D-
pad(Ent) to save.
• Always:
Recording continues, even if no signals
are received.
• Squelch Auto: The transceiver records audio only while
receiving signals (the squelch opens).
t
Push [MENU]
to exit the Menu screen.
■
Continue to record even if no signals are received
Previous view