manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 187

11

VOICE MEMORY FUNCTION

11-6

The displayed items are follows.

q

 

File name

  The playback file name is displayed.

w

 

Recording information

   The recorded frequency, mode and audio category 

are displayed.

  •  When the receive audio is playing back, the audio cat-

egory is displayed as “RX.”

     When the transmit audio is playing back, the audio cat-

egory is displayed as “TX.”

e

 

Playback mark

   While the audio is playing back, a playback mark is 

displayed.

  •  The mark disappears while doing fast forward, rewind or 

pausing.

r

 

Playing back time

  The playing back time is displayed.

t

 

Repeater call sign/name

   The repeater call sign used in the DV mode is dis-

played.

   When the repeater name is programmed in your Re-

peater List, the name is also displayed.

y

 

Total time

  The file’s total playing back time is displayed.

u

 

Progress bar

  The playing back progress bar is displayed.

i

 

File number/Total file number

   The playing back file number, and total file number in 

the folder are displayed.

 

■

VOICE PLAYER screen’s description

q

w

e

u

i

y

r

t

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands