Icom ID-51A Advanced Manual Download Page 131

Page: 131 / 413

D-STAR OPERATION <ADVANCED>

9-36

■

Deleting a Repeater List

The repeater contents can be deleted from the Repeat-
er List.

Push [MENU]

Push D-pad(



) to select the root item (“DV Memo-

ry”), and then push D-pad(Ent).

D-pad

(

)

(Ent)

Push D-pad(



) to select “Repeater List,” and then

push D-pad(Ent).

Push D-pad(



) to select the repeater group that

includes the repeater you want to delete, and then
push D-pad(Ent).

Push D-pad(



) to select the repeater to be deleted.

Push [QUICK]

Push D-pad(



) to select “Delete,” and then push D-

pad(Ent).

Push D-pad(



) to select “YES,” and then push D-

pad(Ent).

• The repeater contents are deleted from the Repeater

List, and the display returns to the RPT LIST screen.

Example:

“East Tokyo” is
deleted.

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands

Icom ID-51A, Advanced Manual

Search results

Summary of Contents for ID-51A

Reviews:

Related manuals for ID-51A

Brands by name

Popular brands