9
D-STAR OPERATION <ADVANCED>
9-21
■
Digital squelch functions (Continued)
D
Setting the digital code squelch
q
Hold down
for 1 second.
• The DR screen is displayed.
• To use the digital call sign squelch function in another
mode, push [V/MHz]
or [M/CALL]
to select the
VFO, Memory, or CALL channel mode.
w
Push [QUICK]
.
e
Push D-pad(
) to select “DSQL,” and then push D-
pad(Ent).
D-pad
(
)
(Ent)
r
Push D-pad(
) to select “CSQL
S
” or “CSQL.”
• CSQL
S
: Turn ON the digital code squelch pocket
beep.
• CSQL:
Turn ON the digital code squelch.
t
Push D-pad(Ent) to set the digital code squelch, and
then exit the quick menu screen.
• “CSQL
S
” or “CSQL” appears.
y
Push [MENU]
.
u
Push D-pad(
) to select the root item (“DUP/
TONE...”), and then push D-pad(Ent).
i
Push D-pad(
) to select “Digital Code,” and then
push D-pad(Ent).
o
Rotate [DIAL] to select a digital code between 00
and 99 for the digital code squelch function.
!0
Push [MENU]
to save and exit the MENU
screen.
!1
When the received signal includes a matching code,
the squelch opens and the audio is heard.
• When the received signal’s code does not match, the
digital code squelch does not open. However, the S/RF
meter shows the received signal strength.
D
Pocket beep function with the digital
code squelch
When a received signal matches your digital code, the
transceiver sounds beep tones for 30 seconds and
“
S
” blinks.
➥
Push [PTT] to answer, or push D-pad(Ent) to stop
the beeps and the “
S
” blinking.
• “
S
” disappears.
If no operation is performed for 30 seconds, the beep
tones automatically stop, but “
S
” continues to blink
to indicate you received a call.
Appears
Beep,
Beep,
Beep...
• When “CSQL
S
” is selected
NOTE:
While operating in the low-speed data commu-
nication mode, the digital code squelch opens even if
receiving a signal does not match to your digital code.
Previous view
