2
USING A microSD CARD
2-5
■
Removing the microSD card
q
Turn OFF the power.
w
Lift OFF the [micro SD] slot cover on the side panel.
e
Push in the microSD card until a click sounds, and
then carefully pull it out.
•
DO NOT
touch the terminals.
r
Completely close the [micro SD] slot cover.
CAUTION:
After a microSD card is
inserted, completely close
the [micro SD] slot cover
as shown to the right.
Wrong
Correct
Close the cover,
leaving no gap.
To remove the microSD card while the transceiver’s
power is ON, do the following steps.
q
Push [MENU]
.
w
Push D-pad(
) to select the root item (“SD Card”),
and then push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select “Unmount,” and then push
D-pad(Ent).
• The dialog “Unmount OK?” appears.
r
Push D-pad(
) to select “YES,” then push D-pad(Ent)
to unmount.
t
When unmounting is completed, “Unmount is com-
pleted.” is displayed, and then the screen automati-
cally returns to the SD CARD menu.
y
Push [MENU]
to exit the MENU screen.
u
Lift OFF the [micro SD] slot cover on the side panel.
i
Push in the microSD card until a click sounds, and
then carefully pull it out.
•
DO NOT
touch the terminals.
o
Completely close the [micro SD] slot cover.
Slot cover
Slot cover
Push the microSD card
until a click sounds.
Pull the microSD
card out.
Previous view