manualshive.com logo in svg

Icom ID-51A, Advanced Manual

Share
Download
Icom ID-51A Advanced Manual Download Page 107

9

D-STAR OPERATION <ADVANCED>

9-12

The Auto Reply voice announcement can be recorded 
and saved on the microSD card to reply to the call with 
your voice. 

NOTE:

 Be sure to insert a microSD card to the [micro 

SD] slot of the transceiver before starting to record a 
voice signal.

 

q

Push [MENU]

.

 

w

 Push  D-pad(

) to select the root item (“Voice 

Memo”), and then push D-pad(Ent).

D-pad

(

)

(Ent)

 

e

 Push  D-pad(

) to select “DV Auto Reply,” and then 

push D-pad(Ent).

 

r

 Push [PTT] to start recording. (No RF is transmit-
ted)

  •  After releasing [PTT], the recording is cancelled.
  •  Maximum record period is 10 second
  •  Hold the microphone 5 to 10 cm (2 to 4 inches) from your 

mouth, then speak at your normal voice level.

  •  Only one announcement can be recorded. The current 

contents will be overwritten if you record again.

 

t

Push [MENU]

 to exit the MENU screen.

 

D

Playing back the recorded voice audio

The recorded voice audio for

 the Auto Reply function

 can 

be played back.

 

q

Push [MENU]

.

 

w

 Push  D-pad(

) to select the root item (“Voice 

Memo”), and then push D-pad(Ent).

 

e

 Push  D-pad(

) to select “DV Auto Reply,” and then 

push D-pad(Ent).

 

r

 Push D-pad(Ent) to start the playback.

 

t

Push [MENU] 

 to exit the MENU screen.

TIP: 

You can delete the recorded audio.

 

➥

 On the DV AUTO REPLY screen, push [QUICK]

, and then push D-pad(Ent).

When no microSD card is inserted:

When no microSD card is in-
serted, this error message is 
displayed.

 

■

Automatic Reply function (Continued)

 

D

Recording an Auto Reply voice announcement

Recording time 
is displayed

While playing back

While recording

Audio level is displayed

Previous view

Summary of Contents for ID-51A






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands