9
D-STAR OPERATION <ADVANCED>
9-9
■
Using the EMR communication function (Continued)
D
Adjusting the EMR AF level
The audio output level when an EMR signal is received
is adjustable between 0 and 39.
When an EMR signal is received, the audio will be
heard at the preset level, or the [VOL] control level,
whichever is higher.
To disable the setting, set it to
“0.”
q
Push [MENU]
.
w
Push D-pad(
) to select the root item (“DV Set”),
and then push D-pad(Ent).
D-pad
(
)
(Ent)
e
Push D-pad(
) to select “EMR AF Level,” and then
push D-pad(Ent).
r
Push D-pad(
) to adjust the EMR audio output level
between 0 (minimum) and 39 (maximum) in single
digit steps. (Default: 19)
t
Push [MENU]
to exit the MENU screen.
■
Display type setting
To see repeater names, call signs, and so on better,
you can change the letter size in the DR screen.
(Default: Normal)
q
Push [QUICK]
.
w
Push D-pad(
) to select “Display Type,” and then
push D-pad(Ent).
e
Push D-pad(
) to select “Large,” and then push D-
pad(Ent).
• The display size changes to large.
Previous view
