Icom ID-50A Basic Manual Download Page 16

Page: 16 / 88

PANEL DESCRIPTION

BASIC MANUAL

■

Function display

BATTERY ICON

Displays the current capacity of the attached battery pack. (p. 6)

“

” is displayed when the optional battery case is attached.

VOX ICON

Displayed when the VOX function is ON.

OPERATING MODE ICONS

Displays the selected operating mode. (p. 15)

FM RADIO ICON

Displayed when the FM radio is ON. (p. 20)

PICTURE SHARE ICON

Displayed when the

Share Pictures function is ON.

DUPLEX ICONS

•

D+: Displayed during plus duplex operation.

•

D–: Displayed during minus duplex operation.

GPS ICON/GPS ALARM ICON

•

Displays the status of the GPS receiver. (p. 10)

•“

” blinks when the GPS alarm beeps.

TONE ICONS

Displayed when the tone or digital squelch function is ON.

RECORD ICONS (p. 26)

•

: Displayed while the transceiver is recording.

•

: Displayed while the recording is paused.

microSD ICONS (p. 8)

•“

” is displayed when a microSD card is inserted.

•“

” and “ ” alternately blink while accessing the microSD card.

AUTO POWER OFF ICON

Displayed when the Auto Power OFF function is ON.

Dual band display

FM RADIO window

(Tuning mode)

Single band display

2 3

8 10

Summary of Contents for ID-50A

























































































Search results

Summary of Contents for ID-50A

Reviews:

Brands by name

Popular brands

Icom ID-50A, Basic Manual

Search results

Summary of Contents for ID-50A

Reviews:

Brands by name

Popular brands