Icom ID-31A PLUS Advanced Manual Download Page 9

Page: 9 / 227

ATTACHING ACCESSORIES

1-3

Attaching and detaching the belt clip

Attaching the hand strap

To attach or detach the belt clip, first remove the

battery pack or case, if it is attached (p 1-2) See the

illustration below

To attach the belt clip, slide the belt clip in the

direction of the arrow until the belt clip locks in place,

and makes a ‘click’ sound

To detach the belt clip, lift the tab up (

), and slide the

belt clip in the direction of the arrow (

)

Tab

Belt clip

Battery pack

or battery case

To attach

To detach

Slide the hand strap through the loop on the top of the

rear panel, as illustrated below

Hand strap

WARNING! NEVER

swing the transceiver by holding

the hand strap This can cause injury to yourself or

others

Summary of Contents for ID-31A PLUS




































































































































































































































Search results

Summary of Contents for ID-31A PLUS

Reviews:

Related manuals for ID-31A PLUS

Brands by name

Popular brands

Icom ID-31A PLUS, Advanced Manual

Search results

Summary of Contents for ID-31A PLUS

Reviews:

Related manuals for ID-31A PLUS

Brands by name

Popular brands