6
VOICE MEMORY FUNCTION
6-2
To stop recording
1� Push [QUICK]�
2�
Select “<<REC Stop>>”.
▼
TIP:
When
RX REC Condition
is set to “Always,”
the recording automatically starts when
“<<REC Start>>” is selected. In that case, recording
continues, even when no signal is received.*
See
page 11-?
for details�
* The recorded file contains no sound.
( MENU > Voice Memo > QSO Recorder >
Recorder Set >
RX REC Condition
)
Recording a QSO audio
To start recording
1� Push [QUICK]�
2�
Select <<REC Start>>.
▼
• "Recording started" is displayed and then returns to
the main display screen.
▼
Innorration
L
• The recording pauses while no signal is received, and
resumes when a signal is received again.
• The recording continues until you manually stop recording,
or the card becomes full.
• If the recording file’s content reaches 2GB, the transceiver
automatically creates a new file, and continues recording.
NOTE:
• You must insert a microSD card into the
transceiver before recording audio.
• The recording function is continuously ON, even if
the transceiver is turned OFF then ON again.
[ENT]
[Down]
[Up]
The recording starts when
you transmit or the squelch
opens.
While recording, the SD
card icon blinks�
Recording standby
