1
ACCESSORIES
1-3
Jack cover
Attach the jack cover when optional equipment is not
used�
Attaching:
1� Attach the jack cover to the [SP MIC] jack (
1
)�
2� Tighten the screws (
2
)�
2
2
2
1
1
1
Detaching:
1� Remove the screws with a Phillips screwdriver
(
1
)�
2� Detach the jack cover to connect the optional
equipment (
2
)�
2
2
2
1
1
1
Battery pack
Attaching:
1� Insert the battery pack in the direction of the arrow
(
1
), and then close it�
2� Hook the latch until it makes a ‘click’ sound (
2
)�
1
2
Battery pack
Latch
Detaching:
R
WARNING!
The latch is tightly locked, so use
caution when releasing it�
DO NOT
use your
fingernail� Use the edge of a coin or screwdriver tip
to carefully release it�
z
Unhook the latch (
1
), and then lift up the battery
pack in the direction of the arrow (
2
)�
1
2
CAUTION: NEVER
remove or attach the battery
pack when the transceiver is wet or soiled� This may
result in water or dust getting into the transceiver
or the battery pack, and may result in them being
damaged�
NOTE:
Keep battery terminals clean� It’s a good idea
to occasionally clean them�
