![background image](http://html1.mh-extra.com/html/icom/ic-u80/ic-u80_instruction-manual_2038107008.webp)
New2001
New2001
2
1
ACCESSORIES
New2001
■
Battery pack or case
To attach the battery pack or case:
q
Fit the battery pack or case in the direction of the arrow,
then close it.
w
Hook the latch until it makes a ‘click’ sound.
w
q
Latch
Battery pack/case
To remove the battery pack or case:
Be careful! The latch is tightly locked, so use caution
when releasing it.
DO NOT use your finger nail. Use the
edge of a coin or screwdriver tip to carefully release it.
q
Unhook the latch.
w
Lift up the battery pack or case in the direction of the arrow.
q
w
NEVER remove or attach the battery pack or case when
the transceiver is wet or soiled. This may result in water or
dust getting into the transceiver/battery pack or case, and
may result in them being damaged.
NOTE: Keep the battery terminals clean. It’s a good idea
to clean the battery terminals once a week.
■
Jack cover
Attach the jack cover when optional equipment is not used.
To attach the jack cover
q
Attach the jack cover to
the [SP MIC] jack.
w
Tighten the screws.
To detach the jack cover
q
Remove the screws with a
phillips screwdriver.
w
Detach the jack cover to
connect optional equip-
ment.
w
w
q
q
q
w