![background image](http://html1.mh-extra.com/html/icom/ic-u80/ic-u80_instruction-manual_2038107032.webp)
26
q
Push
[VFO/MR/CALL] one or more times to select the
VFO mode.
w
Set a desired frequency. (p. 17)
If desired, set other data (e.g. frequency offset, duplex di-
rection, tone squelch, etc.).
e
Push
[FUNC](
M
), and then
[VFO/MR/CALL].
•
“
X
” and the memory channel number blink.
• Select the Call channel mode
to program the Call channel.
r
Push
[
p
] or [
q
] to select a desired channel.
• Select
“1A/1B” to “3A/3B” to program a scan edge channel.
t
Push
[FUNC](
M
), and then hold down
[VFO/MR/CALL] for
1 second to store the entry.
• Three beeps sound.
• If you continue to hold down
[VFO/MR/CALL] for 1 second after
programming, the memory channel number automatically in-
creases.
NOTE: To cancel programming, push [VFO/MR/CALL]
before storing the entry in step
t
.
The VFO mode
Push or to select channel 11.
Push , and then .
Return to the VFO mode.
Push , then hold down for 1 second to program.
• Example— programming 435.450 MHz into memory channel 11 (a blank channel).
■
Programming channels
6
MEMORY/CALL OPERATION