Icom IC-SAT100, Basic Manual, Page: 12 / 72

11
BASIC MANUAL
4
BASIC OPERATION
■
Receiving and transmitting
D
Turning ON the transceiver
z
Rotate [VOL] to turn ON the transceiver.
•The transceiver searches a satellite.
•When the transceiver connected and
registered to the satellite, the status
“IDLE,” transceiver name, and Talkgroup
name is displayed.
L
Push [TG List] to display the Talkgroup
list.
L
Rotate Talkgroup selector to select a
talkgroup.
D
Receiving
When receiving, “LISTENING,” and the
source transceiver’s name is displayed,
and audio should be heard.
L
Rotate [VOL] to adjust the audio output level.
TG List Ignore
LISTENING
TRANSCEIVER02
TALKGROUP01
D
Transmitting
CAUTION: DO NOT transmit without an
antenna.
1. Hold down [PTT].
L
“REQUESTING” is displayed
while the transceiver requests the
transmission.
2. When “TALKING” is displayed, speak
at your normal voice level.
L
You can continuously transmit up
to the period of time allowed by the
system.
TG List Scan
TALKING
TRANSCEIVER01
TALKGROUP01
D
Scan and Ignore
[Scan]
Push to scan a call.
[Ignore]
Push to ignore the received call.
L
The Ignore function will be canceled if
there are no more calls for 90 seconds or
longer.
NOTE:
•The transceiver receives and
transmits using several satellites
orbiting the same orbit. Receiving
and transmitting may fail
depending on the satellite position
or any obstacles between the
transceiver and satellites.
•Your body can also be an
obstacle. Do not hook the
transceiver on your waist.