99
12
CONNECTIONS AND MAINTENANCE
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
MB-132 installation
An optional MB-132
flush
mount
kit
is used to mount the
transceivertoaflatsurfacesuchasaninstrumentpanel.
CAUTION:
Keep the transceiver and microphone at least
1 meter (3.3 feet) away from your vessel’s magnetic
navigation compass.
1. Using the template comes with the transceiver,
carefully cut a hole in the instrument panel, or wherever
you plan to mount the transceiver.
2. Slide the transceiver through the hole.
3. Attach clamps on both sides of the transceiver using
2 supplied (M5 × 8 mm) bolts.
L
Make sure that the clamps align parallel to the transceiver’s
body.
4. Tighten the end bolts on the clamps (rotate clockwise)
sothattheypressfirmlyagainsttheinsideofthe
instrument control panel (
r
).(Torque:0.6N•m)
5. Tighten the locking nuts (rotate counterclockwise) so
that the transceiver is securely mounted in position, as
shown below (
t
).
6. Connect the antenna and power cable, then return the
instrument control panel to its original place.
r
t