manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 79

66

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

OTHER FUNCTIONS

9

 

■

  Anchor  Watch

Anchor Watch is the function to sound an alarm when your vessel is at anchor and has 

drifted.

 

D

 Starting  Anchor  Watch

 

Push 

Anchor

 to start the Anchor Watch mode.

 •   (a red circle) is displayed as the start position of 

anchor watch.

 •A red dashed is displayed as circle as the range of 

anchor watch.

TIP: 

You can also start the Anchor Watch mode by 

selecting the “Start Anchor Watch” item on the Menu 

screen.

[MENU] > Navigation > 

Start Anchor Watch

 

L

When your vessel exceeds the range of the anchor 

watch, “Exceeded anchor radius!” is displayed.

 

D

 Stopping Anchor Watch

1.  Push 

Stop Anchor 

 to stop the Anchor Watch mode.

 •“Deactivate anchor watch. Are you sure?” is displayed.

2.  Push [OK].

 •  (a red circle) and a red dashed circle disappear.

TIP:

 You can also stop the Anchor Watch mode by 

selecting the “Stop MOB” item on the Menu screen.

[MENU] > Navigation > 

Stop Anchor Watch

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands