manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 63

50

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

8

AIS FUNCTION 

 

■

About AIS

The Automatic Identification System (AIS) is primarily used for collision-risk management 

and navigation safety. It can automatically transmit and receive vessel information, such 

as the vessel name, MMSI code, vessel type, position data, speed, course, destination, 

and more, depending on the class. Information is exchanged among vessels and/or base 

stations on the VHF maritime mobile band. The information helps to identify other nearby 

vessels or stations by displaying the received data on a plotter or a radar screen.

Other vessel

(Class B AIS)

Other vessel

(Class A AIS)

Vessel Information

Base Station

Your vessel

 

■

AIS classes

There are 7 types of AIS stations, vessels, base stations, Search and Rescue (SAR), 

Aids to Navigation (AtoN), Search and Rescue Transmitter (AIS-SART), Man OverBoard 

(MOB), and Emergency Position Indicating Radio Beacon-AIS (EPIRB-AIS).

There are 2 classes of AIS units, which are installed on vessels, Class A and Class B.

Under the Safety Of Life At Sea (SOLAS) convention, all SOLAS vessels, as described 

below, are required to install a Class A AIS transponder:

 •

Upwards of 300 gross tonnage engaged on international voyages.

 •

Passenger vessels, irrespective of size, engaged on international voyages.

 •

Upwards of 500 gross tonnage not engaged on international voyages.

A Class B AIS transponder is designed to be interoperability with Class A units, but not to 

impact the Class A network.

Many commercial vessels, and some leisure craft, not classified as requiring a Class A 

unit, choose to install a Class B unit to avoid accidents at sea.

NOTE:

 The IC-M510/IC-M510E can be input AIS information from the built-in AIS 

receiver (if built in) or an external NMEA 0183 or NMEA 2000 sentence source.

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands