manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 30

17

5

SCAN OPERATION

 

■

 Setting   Favorite channels

You can quickly recall often-used channels by setting them as Favorite channels. You can 

set Favorite channels in each Channel Group.

1.  Select a Channel Group on the Menu screen. (p. 10)

[MENU] > Settings > Radio > 

Channel Group

2.  Push [▲] or [▼], or rotate [CH/ENT] to select the channel.

3.  Push [◄] or [►] to display 

FAV

★

.

4.  Push 

FAV

★

.

 •

The selected channel is set as a Favorite channel, and “

” is displayed.

 

L

To cancel the setting, push 

FAV

★

 again.

TIP:

 You can set all channels as Favorite channels, clear all settings, or reset to the 

defaults. By default, some channels are preset as Favorite channels. The preset 

channels diff er, depending on the transceiver version.

 

■

  Starting a scan (Except for the NLD version)

Example:

 Starting a Normal Scan.

1.  Select a Channel Group on the Menu screen. (p. 10)

[MENU] > Settings > Radio > 

Channel Group

2.  Push [◄] or [►] to display 

Scan

.

3.  Push 

Scan

.

 •

The scan starts.

 •

“SCAN” is displayed during a Normal Scan, and 

“SCAN 16” is displayed during a Priority Scan.

 •

“SCAN” and “

” are displayed when a signal is 

received.

 

L

When a signal is received, the scan pauses until it 

disappears, or resumes after 5 seconds, depending 

on the Scan Timer setting in “Radio Settings.”

 

L

A beep sounds and “16” blinks when a signal is 

received on Channel 16 during a Priority scan.

4.  To stop the scan, push 

Scan

.

TIP: 

To properly receive signals, be sure to adjust the 

squelch to a suitable level.

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands