manualshive.com logo in svg

Icom IC-M510, Instruction Manual

Share
Download
Icom IC-M510 Instruction Manual Download Page 25

12

1

7

4

10

15

18

2

8

13

5

11

16

3

9

14

6

12

17

BASIC OPERATIONS

4

 

D

 Adjusting  the   volume level

 

Rotate [VOL] to adjust the audio volume level.

 

D

 Adjusting  the   squelch level

Squelch enables the audio to be heard only while receiving a signal that is stronger than 

the set level. A higher level blocks weak signals, so that you can receive only stronger 

signals. A lower level enables you to hear weak signals.

 

Rotate [SQL] to adjust the squelch level.

 

D

  Adjusting the backlight and the display mode

The Function display and keys can be backlit for better visibility under low light conditions. 

And, you can set the display mode to Day mode or Night mode.

The Day mode is for the daytime operation, and the screen items are in full color.

The Night mode is for the nighttime operation, and the screen items are in black and red.

1.  Open the “Backlight” screen.

[MENU] > Settings > Configuration > 

Backlight

 

L

You can also push 

Backlight 

 to open the “Backlight” 

popup screen.

2.  Push [◄] or [►] or rotate [CH/ENT] to adjust the 

backlight level.

 •

The backlight level is set, and the transceiver returns to 

the previous screen.

 

L

The backlight level is adjustable in 7 levels and “OFF.” 

“OFF” is selectable only for the Day mode.

3.  Push [▼], then push [◄] or [►] or rotate [CH/ENT] to 

select “Day” or “Night.”

4.  Push [ENT] or [CH/ENT] to exit the Menu screen.

 

■

 Adjusting the volume/ squelch/backlight/display mode

Summary of Contents for IC-M510





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands