11
4
BASIC OPERATION
New2001
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving and transmitting
■
CAUTION:
Transmitting without an antenna will damage
the transceiver.
Hold down [PWR](Dial) to turn ON the power.
q
Set the audio and squelch levels. (p. 3)
w
First, open the squelch. Then, adjust the audio output
➥
level. After that, adjust the squelch level until the noise
just disappears.
Change the channel group. (p. 10)
e
Rotate dial or push [
r
∫
](CH)/[
√
](CH) to select a channel.
(pp. 9, 10)
• Pushing [
Y
]/[
Z
]
on the microphone selects only Favorite chan-
nels.
• You can turn OFF the FAV on MIC setting (p. 93). After that, you
can select all channels by the microphone.
• When receiving a signal, the “
” icon appears and audio is
heard.
• Further adjustment of the volume level may be necessary.
Push [HI/LO] to select the output power, if necessary.
t
• The “25W” icon appears when high power is selected, and the
“1W” icon appears when low power is selected.
• Choose low power for short range communications, choose high
power for longer distance communications.
• Some channels are for only low power.
Hold down [PTT] to transmit, then speak at your normal
y
voice level.
• The “
” icon appears.
• Channel 70 cannot be used for transmission other than DSC.
Release [PTT] to receive.
u
Information
✓
The Noise Cancel function reduces random noise components
in the transmit and/or receive signal. See page 92 for details.
IMPORTANT:
To maximize the readability of your transmit-
ted signal, pause a few seconds after pushing [PTT], hold
the microphone 5 to 10 cm from your mouth and speak at
a normal voice level.
NOTE for the TOT (Time-out Timer) function
✓
The TOT function inhibits continuous transmission beyond a
preset time period after the transmission starts.
10 seconds before transmission is cutoff, a beep sounds to
indicate the transmission will be shut down and “TOT” appears
in the channel name field. Transmission is not possible for 10
seconds after this shut down.
Microphone
u
y
r
t
CLEAR
MENU
ENT
CH
CH
t
q
r
w
Summary of Contents for IC-M506EURO
Page 1: ...INSTRUCTION MANUAL iM506EURO VHF MARINE TRANSCEIVER ...
Page 114: ......