14
4
BASIC OPERATION
New2001
■
Editing a channel name
You can edit the name of each operating channel and weather
channel, using numbers, uppercase letters, symbols, and
a space. This enables easy recognition of the channels or
stations. All VHF marine channels are set with default names.
1. Push [▲] or [▼] to select the channel to edit.
2. Push [◄] or [►] to display
NAME
.
L
You cannot edit a channel name during Dualwatch, Tri-watch,
or a scan.
3.
Push
NAME
.
•
The “CHANNEL NAME” screen is displayed.
4. Edit the channel name.
TIP:
• Select
!$?
to enter symbols, and select
123
to enter
numbers and letters.
•
Select characters or a space using [▲]/[▼]/[◄]/[►].
•
Select “◄” or “►” to scroll.
•
Push [ENT] to enter the selected character.
•
Select “←” or “→,” or rotate [DIAL] to move the cursor.
•Push
EXIT
to cancel editing.
5.
Push
FIN
to save the edited name and return to the
operating screen.
■
AquaQuake Water Draining
function
Water in the speaker grill may muffle the sound coming
from the speaker. The AquaQuake Water Draining function
removes water from the speaker grill by vibrating the speaker
cone.
1. Push [◄] or [►] to display
AQUA
.
2.
Hold down
AQUA
to turn ON the function.
•
A low frequency vibration beep sounds to drain the water,
regardless of the volume level setting.
L
This function is activated for a maximum of 10 seconds,
even if you continue to hold down
AQUA
.
3. Release the key to turn OFF the function.
CAUTION: DO NOT
use the AquaQuake Water Draining
function when an external speaker is connected.
