Icom IC-F6062D, Operating Manual, Page: 27 / 32

3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24
■
Transmitting a command
The following Individual calls allow you to send special com-
mands. These calls will function if you are designated as a
specific station. Ask your dealer for details.
D Transmitting an Ambience Listening Call
An Ambience Listening call allows you to send a command
that will require the target station to transmit its microphone
audio.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push [CH Up] or [CH Down] to select a desired Individual
ID.
e
Push [dPMR Button] again to enter the application selec-
tion mode.
• “ STATUS ” is displayed.
r
Push [CH Up] or [CH Down] to select “ LISTENING .”
t
Push
[Call]
to transmit an Ambience Listening call to the
selected station.
• “
WAIT
” is displayed while transmitting.
• “ OK ” is displayed when an acknowledgement is received, then
the called station’s microphone audio can be heard for the pre-
programmed time period.
• “ FAILED ” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.
D Transmitting a Stun Call
A Stun call allows you to send a command that will stun the
target station.
q
Push
[dPMR Button]
to enter the ID selection mode.
• The pre-programmed ID is displayed.
w
Push [CH Up] or [CH Down] to select a desired Individual
ID.
e
Push [dPMR Button] again to enter the application selec-
tion mode.
• “ STATUS ” is displayed.
r
Push [CH Up] or [CH Down] to select “ STUN .”
t
Push
[Call]
to transmit a Stun call to the selected station.
• “ WAIT ” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “ FAILED ” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.