13
3
dPMR OPERATION
13
■
dPMR operation
The IC-F5062D and IC-F6062D provide digital Private Mobile
Radio (dPMR) operation that meets the 6.25 kHz bandwidth
requirements for narrow band operation. This increases ef-
ficiency of channel allocation and use of the spectrum.
NOTE:
During dPMR operation, BIIS 1200 operation is
disabled.
■
dPMR display
The following displays appear in dPMR operation.
CONNECT
: When an acknowledgement of a Voice or Emer-
gency call is received.
OK
: When an acknowledgement of a message (sta-
tus message or SDM) or command (Ambience
Listening, Stun, Kill, or Revive) is received.
FAILED
: When no acknowledgement of a call is re-
ceived.
WAIT
: While transmitting.
CLR DOWN
: When a connection is terminated.
ID
: When no name is programmed, appears to the
left of the calling station’s ID.
TG
: When no name is programmed, appears to the
left of the Talkgroup ID.
■
Receiving a call
D
Receiving an Individual call
q
When an Individual call is received:
• Rings sound.
• “
” appears and the mute is released.
• “
” appears or blinks, depending on the pre-programmed set-
tings.
• The calling station’s ID (or name) blinks.
I D
0 0 0 0 0 0 1
Calling station’s ID
Appears or blinks
Appears
w
While holding down
[PTT]
, speak into the microphone at
your normal voice level.
e
Release
[PTT]
to receive.
r
After the communication is finished, push
[Clear]
to send
a ‘Disconnect’ signal to terminate the connection.
• Either station can send a ‘Disconnect’ signal.
• “
” disappears, “
CLR DOWN
” appears for approximately 2
seconds, and the transceiver automatically returns to the
stand-by mode.