12
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Horn output
When a horn is connected to the D-Sub 25-pin connector of
the transceiver, the Automatic Honking function is usable, de-
pending on the pre-programmed settings.
When a status message is received, the transceiver controls
the vehicle’s horn to sound an alert for the pre-programmed
time period.
This function is useful when you are away from the trans-
ceiver.
Ask your dealer or system operator for connection and set-
ting details.
■
Printer connection
When a printer is connected to the D-sub 25-pin connector of
the transceiver, received SDM and the calling station’s ID can
be printed out, depending on the pre-programmed settings.
Ask your dealer or system operator for connection and set-
ting details.