![background image](http://html1.mh-extra.com/html/icom/ic-f5400dp-series/ic-f5400dp-series_operating-manual_4287336151.webp)
11
Bluetooth
®
OPERATION
11-11
This section describes how to accept a pairing request
from a Bluetooth
®
device�
Portable:
For the Ten-key and the Simple key types
Mobile:
For the LCD types
Step 1: Preparing the Bluetooth
®
device
Step 2: Turning ON the Bluetooth
®
function
(Transceiver)
L
See page 11-3 for details�
Step 3: Entering the Waiting Pairing mode
(Transceiver)
1� Push [Menu] to display the “Menu” screen�
2� Push [Left] or [Right] to select “Bluetooth,” then
push [OK]�
3� Push [Up] or [Down] to select “Waiting Pairing,”
then push [OK]�
•
Enters the Waiting Pairing mode�
TIP:
You can enter the Waiting Pairing mode by
pushing [Waiting Pairing]�
Step 4: Entering the Pairing mode
(Bluetooth
®
device)
L
See the device’s instruction manual for details�
Step 5: Sending a Pairing request to the
transceiver (Bluetooth
®
device)
1� The device displays the transceiver’s Bluetooth
®
unit name on the screen�
2� Select the displayed name to send a pairing
request�
•
The Bluetooth
®
device sends a pairing request�
L
See the device’s instruction manual for details�
L
Youcanconfirmthetransceiver’sBluetooth
®
unit
name on the “BT Device Info” screen� (p� 6-17)
Step 6: Receiving a Pairing Request (Transceiver)
1� “Passkey? MMMMM” is displayed on the
transceiver�
2� Confirm the displayed passkey is the same as
yours�
3� Push [Left] or [Right] to select <Accept>, then
push [OK]�
•
Pairing starts�
4� After the pairing is complete, the device’s name is
displayed in the “BT Device List” screen�
5� Push [Up] or [Down] to select the Bluetooth
®
device to connect, then push [OK]�
►
Continued on the next page�
Accepting a pairing request from a Bluetooth
®
device