![Icom IC-F5020 Series Insrtuction Manual Download Page 18](http://html2.mh-extra.com/html/icom/ic-f5020-series/ic-f5020-series_insrtuction-manual_4272806018.webp)
14
e
r
Antenna
Black
Red
12V
Battery
Solder
Crimp
NOTE: Use the terminals as shown
below for the cable connections.
q
ANTENNA CONNECTOR
Connects to an antenna. Contact
your dealer about antenna selec-
tion and placement.
q
w
w
EXTERNAL SPEAKER JACK
Connect a 4–8
ø
external speaker.
e
MICROPHONE HANGER
Connect the supplied micro-
phone hanger to the vehicle’s
ground for microphone on/off
hook functions. (See p. 1)
r
OPTIONAL CABLE (OPC-1939)
t
t
DC POWER RECEPTACLE
Connects to a 12 V DC battery.
Pay attention to polarities.
Optional speaker
Connect an external modem,
dimmer control, etc.
R
WARNING! NEVER connect
to a 24 V battery. This could
damage the transceiver.
R
WA R N I N G ! N E V E R r e m o v e t h e
fuse-holders from the DC power cable.
(Depending on version, the fuse holder
may not be attached to the black cable.)
■
Rear panel connection
3
CONNECTION AND MAINTENANCE