40
6
SPEAKER MICROPHONE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
To attach
■
BE SURE
to turn OFF the power before attaching.
Attach the connector of the speaker microphone into the multi con-
nector on the transceiver, and tighten the screw.
Turn OFF the power
IMPORTANT: KEEP
the connector cover attached to the trans-
ceiver when the speaker microphone is not in use. (p. 4)
Water will not get into the transceiver even if the cover is not at-
tached, however, the terminals (pins) will become rusty, or the
transceiver will function abnormally if the connector becomes
wet.
CAUTION:
Attach the multi
connector snugly, but do
not overtighten.
A loose connection will al-
low water intrusion into the
connector. A overtightened
connector will damage the
connector pins in the trans-
ceiver.