OPTIONAL UNIT INSTALLATION
7
20
You can install up to two optional units in the transceiver.
n
Installation
q
Unscrew nut
a
, and remove the knobs.
w
Unscrew screw
b
and 2 screws
c
, then remove the multi-con-
nector cover and rear panel.
e
Unscrew 2 screws
d
, then remove the multi-connector.
r
Unscrew 2 screws
e
, then take off the chassis from the front
panel in the direction of the arrow.
Be careful
: A flat cable is connected between the MAIN unit on the
chassis and front panel.
a
b
d
d
c
e
t
Install the desired optional unit. Insert tightly to avoid a bad con-
nection.
Slot 1
Slot 2
y
Program the necessary information with the cloning software
before operation. Please ask your dealer or system operator for
details.