![background image](http://html1.mh-extra.com/html/icom/ic-f3160-series/ic-f3160-series_operating-manual_4263117008.webp)
5
2
BIIS 1200 OPERATION
■
Transmitting a call
A total of 3 ways for code selecton are avalable—selectng
the call code from memory, enterng the call code from the
keypad and callng back from the queue channel record.
D
Using call memory
q
Durng stand-by operaton, push
[BIIS Button]
to enter
the call code memory channel selecton mode.
• “
” appears.
TXCE
CALL
TXC
BIIS
STATION1
0001
Appears
w
Push
[CH Up]
or
[CH Down]
to select the desred call
code.
e
Push
[Call]
or
[PTT]
* to call.
* PTT call can be made only when PTT call capablty s permt-
ted.
NOTE:
When no answer back s receved, the trans-
cever repeats the call 3 tmes (default) automatcally,
and
“
WAIT
”
s dsplayed durng each call. However, an
error beep sounds and
“
FAILED
”
s dsplayed when
no answer back s receved after the calls.
r
Push
[PTT]
to transmt; release to receve.
t
Push
[Moni(Audi)]
to send the ‘Clear down’ sgnal.
D
Calling back from the queue channel
q
Durng stand-by operaton, push and hold
[BIIS Button]
for 1 sec. to enter the queue memory channel selecton
mode.
<
QUEUE
>
–QUEUE!–
TXCE
CALL
TXC
BIIS
w
Push
[CH Up]
or
[CH Down]
to select the desred record.
e
Push
[Call]
or
[PTT]
* to call.
* PTT call can be made only when PTT call capablty s permt-
ted.
NOTE:
When no answer back s receved, the trans-
cever repeats the call 3 tmes (default) automatcally,
and
“
WAIT
”
s dsplayed durng each call. However, an
error beep sounds and
“
FAILED
”
s dsplayed when
no answer back s receved after the calls.
r
Push
[PTT]
to transmt; release to receve.
t
Push
[Moni(Audi)]
to send the ‘Clear down’ sgnal.