28
5
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Transmitting a call
IDAS operaton allows you to make a call to a specfc sta-
ton (Indvdual call) or to a partcular group (Talkgroup call).
Other dgtal mode transcevers on the channel wll not re-
ceve a call that does not match ther ndvdual or talkgroup
ID and/or RAN (Rado Access Number) code.
D
Transmitting a Voice Call
q
Push
[Digital Button]
to enter the applcaton selecton
mode.
• “
VOICE
” appears.
• To change the call type, push and hold
[Digital Button]
for 1 sec.
durng stand-by operaton. After changng, the transcever en-
ters the applcaton selecton mode automatcally.
INDIVIDUAL
DIGI STUP STDN
VOICE
DIGI STUP STDN
* This illustration is described with
Individual call type.
w
Push
[Digital Button]
agan to enter the Indvdual or
Talkgroup ID selecton mode.
• The pre-programmed ID name s dsplayed.
• When ID name s not programmed, ID code s dsplayed.
• When you want to send a voce message to all transcevers
wthn the communcaton range, use the ‘All Call’ functon–—
select the ID code “65535”.
e
Push
[CH Up]
or
[CH Down]
to select the desred ID
name (or ID code).
• Dependng on the pre-settng, you can nput the ID drectly.
(10-key verson only) See p. 39 for detals.
VOICE
STATION 1
DIGI STUP STDN
Individual or Talkgroup ID
name is displayed.
r
Push and hold
[PTT]
, then speak nto the mcrophone
to send a voce message to the selected staton or talk-
group.
t
Release
[PTT]
to receve.
Convenient!
(10-key verson only)
Dependng on the pre-settng, you can use the quck ID se-
lecton for the Voce Call.
➥
Durng stand-by operaton, push the desred dgt key ([1]
to [9] or [0]) to enter the ID selecton mode.
• The approprate ID s dsplayed.