![background image](http://html1.mh-extra.com/html/icom/ic-f3160-series/ic-f3160-series_operating-manual_4263117013.webp)
10
2
BIIS 1200 OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Transmitting an SDM
D
General
The short data message, SDM, can be sent to an ndvdual
staton or group statons. Also, 8 SDM memory channels are
avalable and the messages can be edted va PC program-
mng.
D
Transmitting an SDM
q
Durng stand-by operaton, push
[BIIS Button]
, then push
[CH Up]
or
[CH Down]
to select the desred staton/group
code.
w
Push
[BIIS Button]
agan,
then push
[CH Up]
or
[CH Down]
to select the desred SDM.
Or, you can select the desred SDM usng
[Status Up]
/
[Status Down]
key drectly.
SDM is displayed.
TXCE
CALL
TXC
BIIS
MESSAGE 1
How are you?
e
Push
[Call]
or
[PTT]
* to transmt the SDM to the selected
staton/group.
* PTT call can be made only when PTT call capablty s permt-
ted.
• 2 beeps wll sound and the transcever returns to stand-by op-
eraton automatcally when the transmsson s successful.
D
Programming an SDM memory
(10-key verson only)
q
Durng stand-by operaton, push
[BIIS Button]
twce,
then push
[CH Up]
or
[CH Down]
to select the desred
SDM to be edted.
w
Push
[
M
]
or
[#]
to enter the message edtng condton.
• The first character blnks when
[#]
s pushed, the last character
blnks when
[
M
]
s pushed.
TXCE
CALL
TXC
BIIS
MESSAGE 1
How are you?
Blinks
When [#] is pushed.
e
Push the approprate dgt key,
[0]
to
[9]
, to enter the de-
sred character.
• See the table at the next page for the avalable characters.
• Pushng
[CH Up]
also enters space, pushng
[CH Down]
de-
letes the selected character.
r
Push
[#]
to move the cursor to the rght, push
[
M
]
to move
the cursor to the left.
t
Repeat steps
e
and
r
to set the desred text message.
y
Push and hold
[BIIS Button]
for 1 sec. to overwrte the
set content nto the memory.
• Push
[BIIS Button]
momentarly to cancel the edtng and re-
turn to the orgnal message ndcaton.