Icom IC-F3061T, Instruction Manual

Page: 11 / 36

7
2
PANEL DESCRIPTION
2
SCAN A KEY “
SCNA
”
➥
This key’s operation depends on the Power ON Scan set-
ting.
When the power ON scan function is turned OFF;
Push to start and cancel scanning operation. In case of
transmission during scan, cancels scanning.
When the power ON scan function is turned ON;
Push to pause scanning., then resumes scanning after
passing a specified time period. In case of transmission
during scan, scanning will be cancelled.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the de-
sired group.
SCAN B KEY “
SCNB
”
➥
Push to start and cancel scanning operation. In case of
transmission during scan, pauses scanning. Scanning
resumes after passing a specified time period.
➥
Push and hold this key for 1 sec. to indicate the scan
group, then push [CH Up] or [CH Down] to select the de-
sired group.
SCAN ADD/DEL (TAG) KEY “
SCAD
”
➥
Push to add or delete the selected channel to/from the
scan group.
1. Push to indicate the scan group, then push [CH Up] or
[CH Down] to select the desired group.
2. Push to add or delete the channel to/from the selected
scan group.
3. Push and hold for 1 sec. to exit the scan group selec-
tion mode.
➥
Push this key while scan is paused (a signal is detected)
on a channel (except for priority channel,) the channel is
cleared from the scan group.
Depending on the setting, the cleared channel is
added to the scan group again after the scan is can-
celled. (Nuisance Delete function)
PRIO A/B KEYS “
PRA
” “
PRAR
” “
PRB
” “
PRBR
”
➥
Push to select Priority A or Priority B channel.
➥
Push and hold [Prio A (Rewrite)] to rewrite the Prio A
channel.
MR-CH 1/2/3/4 KEYS “
CH1
” “
CH2
” “
CH3
” “
CH4
”
Push to select an operating channel directly.
MONI KEY “
MON
”
Mute and release the CTCSS (DTCS) or 2-tone squelch mute.
Open any squelch/deactivate any mute while pushing this key.