4
SETTINGS
7
Setting the ringer level
You can adjust the ringer level between 1 and 5, or 1
(linked) and 5 (linked).
When a linked option is selected, you can adjust the
ringer level by rotating
[VOL]
.
Rotate
q
[VOL]
to turn OFF the power.
Set
w
[ROTARY SELECTOR]
to Channel 16.
While holding down
e
[Lower]
, rotate
[VOL]
to turn
ON the power and enter the ringer level adjustment
mode.
Push
r
[Upper]
to increase, or push
[Lower]
to de-
crease the ringer level as shown to the right.
• A beep sounds after pushing
[Upper]
. Therefore, you
can determine the current level setting by the increasing
loudness of the beep that sounds.
• To determine if you have selected a linked level, set
[VOL]
to minimum, then push
[Upper]
up to 10 times, listening
for the loudest beep (level 5). Pushing
[Upper]
once after
the loudest beep will select 1 (Linked). Repeatedly push
[Upper]
or
[Lower]
to select the desired linked level.
Rotate
t
[VOL]
to turn OFF the power to exit the ringer
level adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Lower]
[Upper]
2
5
4
3
1
5 (Linked)
4 (Linked)
3 (Linked)
2 (Linked)
1 (Linked)
Pushing
[Lower]
Pushing
[Upper]