![background image](http://html1.mh-extra.com/html/icom/ic-f111/ic-f111_instruction-manual_4213438010.webp)
■
Turning power ON
q
Push [ ] to turn the power ON.
w
If the transceiver is programmed for a start up passcode,
input the digit codes as directed by your dealer.
• The keys in the table below can be used for password input.
• The transceiver detects numbers in the same block as identi-
cal. Therefore “01234” and “56789” are same.
e
When the “PASSWORD” indication does not clear after in-
putting 4 digits, the input code number is incorrect. In this
case, turn the power off and start over.
■
Channel selection
Several types of channel selection are available. The meth-
ods may differ according to your system setup.
NON-BANK TYPE:
Push
[
]
/
[
]
to select the desired operating channel in se-
quence; or, push one of the
[CH 1]
to
[CH 4]
keys to select a
channel directly.
BANK-TYPE:
Push
[BANK]
to select the desired bank number or name.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
the power ON, the transceiver automatically starts scanning.
Scanning stops when receiving a call or when taking the mi-
crophone off hook.
KEY
NUMBER
0
1
2
3
4
5
6
7
8
9
7
2
OPERATION
Summary of Contents for IC-F111
Page 1: ...INSTRUCTION MANUAL iF111 VHF TRANSCEIVER iF121 iF211 iF221 UHF TRANSCEIVER ...
Page 22: ...MEMO ...
Page 23: ...MEMO ...