![background image](http://html.mh-extra.com/html/icom/ic-a24e/ic-a24e_instruction-manual_612412023.webp)
19
6
VOR NAVIGATION (IC-A24E ONLY)
VOR functions
■
To select the CDI mode
ï
To show the deviation between your flying course and the
desired course, push
, then push [4•
CDI
] to select the
CDI mode.
To select the DVOR mode
ï
When entering the NAV band, 108.000–117.975 MHz, the
IC-A24E selects the DVOR mode automatically.
To show your aircraft’s direction to (or from) the VOR station,
push
, then push [1•
DVOR
] to select the DVOR mode.
‘TO’ or ‘FROM’ flag selection
ï
The to-from flag indicators indicate whether the VOR navi-
gation information is based on a course leading to the VOR
station or leading away from the VOR station.
Push
, then push [3•
FROM
] or [2•
TO
] to change the flag
from ‘TO’ to ‘FROM’ or vice versa, respectively.
NOTE:
• When using the ‘TO’ flag and passing through the VOR station,
the ‘TO’ flag changes to the ‘FROM’ flag automatically.
• When turning power ON, the ‘FROM’ flag is selected automati
-
cally.
ï
Selecting the next VOR station when using
CDI mode
(when using the course deviation needle)
q
Push
, then push [1•
DVOR
] to select the DVOR mode.
w
Push the keypad or rotate [DIAL] to set the next VOR sta-
tion’s frequency.
e
Push
, then push [4•
CDI
] to select the CDI mode.
• Select ‘TO’ or ‘FROM’ flag, if desired.
Operating frequency can not be
changed.
Each course deviation arrow
indicates a two-degree deviation.
Course indicator is fixed, but it
can be changed with the tuning
[DIAL] or keypad.
Course deviation needle does not
appear.
Course indicator shows your
direction to (or from) the VOR
station.
6