![background image](http://html.mh-extra.com/html/icom/ic-a15/ic-a15_instruction-manual_612388036.webp)
Cloning allows you to quickly and easily transfer the entered
data from one transceiver to another transceiver, or data from
a PC to a transceiver, using the CS-A14 cloning software.
D
Transceiver to transceiver cloning
q
Connect the OPC-474
CLONING CABLE
to the
[MIC/SP]
jack of the master and sub transceivers.
• The master transceiver is used to send data to the sub trans-
ceiver.
w
Turn OFF the master and sub transceivers.
e
While holding down
[MR]
, and rotate
[VOL]
to enter the
cloning mode (for the master transceiver only).
• “CLONE” appears and the transceivers enter the cloning
standby mode.
r
Push
[PTT]
on the master transceiver.
• “CL.OUT” appears on the master transceiver’s display.
• “CL.IN” automatically appears on the sub transceiver’s display.
t
When the cloning is finished, turn OFF the power, then
turn ON again to exit the cloning mode.
NOTE:
Transceiver to transceiver cloning between the
IC-A15 and the IC-A15S cannot be performed.
OPC-474
Master
Sub
to the speaker
connector
to the speaker
connector
The master transceiver’s
display while cloning
The sub transceiver’s
display while cloning
31
8
CLONING